DB BR V200.0

By Ties

The DB class V 200.0 was Germany’s first production series of diesel-hydraulic express locomotives. The first prototypes where built in 1953, with a total of 86 engines being built by 1958.

By Landesarchiv Baden-Württemberg, Staatsarchiv Freiburg W 134 Nr. 025409a / Fotograf: Willy Pragher
CC BY 4.0, https://commons.wikimedia.org/w/index.php?curid=171932353

I started working on this model about 2 years ago. It is build in 1:45 scale, and is powered with two PU L motors and a single PU hub. The single hub does limit the pulling power a bit.

The starting point for this model the 3×3 curved quarter round slope (part #76797) used on the nose, the rest of the design grew from there.

The model is designed so it can be build using official LEGO® bricks as much as possible, but there are a few exceptions.

For wheels, the model uses custom “MS” or “#6” sized train wheels, with a rolling diameter of 20.8mm. These are slightly larger then standard LEGO® train wheels, and are available from 3rd party manufacturers like HA Bricks.

The model also uses 2 metal train axles to hold a piece of hose in place using a magnet. Original LEGO® train axles are made from stainless steel, and therefor not suitable for this purpose. I’ve used train axles from 3rd part manufacturer Brick Tracks, but any piece of steel wire of a similar diameter should work.

Lastly, the model requires some sections of rigid hose (also called outer cable) to be cut to specific lengths. These lengths are called out throughout the instructions.

I have done my best to make the building instructions as easy to follow as possible, but this is a very complex model that requires a lot of care and attention to build.

I would not recommend trying to build this model unless you already have experience building complex MOCs.